Modification Bulletin All MBs
| MB Number | Revision | MB Type | Title | Date (YYYY-MM-DD) |
|---|---|---|---|---|
| MB 500-31-007 | K | Recommended | IFMS 2.7 Equipment Upgrade | 2019-10-02 |
MB Reason
To upgrade aircraft equipment for IFMS 2.7.
Rev K of this MB updates Work Instruction references for Blue to White Backlighting.
Rev J of this MB updates the Blowout Panel information for the Eclipse SE.
Rev H of this MB clarifies the references and updates the transponder part numbers.
Rev G of this MB incorporates "Generic" Blowout Panel option and new transponders.
Rev F of this MB clarifies compliance requirements.
Rev E of this MB clarifies software and hardware compatibility.
Rev D of this MB updates the wiring harness part number.
Rev C of this MB updates the References section.
MB Description
This Modification Bulletin upgrades the instrument panel for IFMS 2.7 by replacing the Displays, Keyboards, ACP and GPS, and adding SDU.
MB Compliance
Compliance with Rev A, B, C, D, E, or F does NOT constitute compliance with Rev G, H, J or K.
Compliance with Rev A, B, C, D, and E does NOT constitute compliance with Rev F.
At the operator's discretion. The following Bulletins must be completed prior to, or in conjunction with this MB.
- MB 500-24-006, Power Supply Upgrade for In Seat Power Supply (ISPS) System
- MB 500-31-003, Avio NG 2.5 Provisions
- MB 500-31-004, Aircraft Computer System (ACS) Software Update to 5.5.06
- MB 500-31-005, BIO Software Update to Version 6.0
- SB 500-99-005, Avionics Upgrade To Avio NG + 1.5 Configuration
- SB 500-34-015, 3rd Attitude Source Installation (Complete all aspects to install an electrically and physically connected remote magnetometer.)
- SB 500-76-002, FADEC Software Upgrade
Effectivity
Aircraft Serial Numbers: 000001 to 000262, post SB 500-99-005, Avionics Upgrade to Avio NG + 1.5 Configuration, and 000266 to 000267.
Aircraft Serial Numbers: 550-0263 to 550-0265, post SB 500-99-005, Avionics Upgrade to Avio NG + 1.5 Configuration, and 550-0268 to 550-0280, 550-0282 to 550-0284.
Export Control
These commodities, technology or software, were exported from the United States in accordance with the Export Administration Regulations. These commodities, technology or software are intended for use only in the End User’s country. An export license from the U.S. Department of Commerce may be required before these products can be re-exported, transferred, transshipped on a non-continuous voyage, or otherwise disposed of in any other country, either in their original form or after being incorporated into an end item. Diversion of this end-item or its use contrary to any applicable U.S. government license or to U.S. law is prohibited.