Menu

Service Bulletin All SBs


SB Number Revision SB Type Title Date (YYYY-MM-DD)
SB 500-57-012 A Mandatory Overbraid Inspection 2016-03-24

Click on the button to download this Service Bulletin document.

Download SB 500-57-012


SB Reason

This Service Bulletin inspects the wire harness between the inboard flap actuator and the external position sensor for overbraid installation.


SB Description

Some aircraft that were upgraded to Tamagawa flap actuators per SB 500-57-008 prior to February 19, 2016 may not have the inboard flap actuator to external position sensor wire harness protected with overbraid. This Service Bulletin inspects for that overbraid and details how to install if it is not installed.


SB Compliance

Eclipse Aerospace Incorporated considers this to be a mandatory inspection that must be performed at the next 300 hr / 24 month inspection.


Effectivity

Aircraft Serial Numbers: 000001 to 000239, Post SB 500-57-008 (Revisions A or B).



Export Control

These commodities, technology or software, were exported from the United States in accordance with the Export Administration Regulations. These commodities, technology or software are intended for use only in the End User’s country. An export license from the U.S. Department of Commerce may be required before these products can be re-exported, transferred, transshipped on a non-continuous voyage, or otherwise disposed of in any other country, either in their original form or after being incorporated into an end item. Diversion of this end-item or its use contrary to any applicable U.S. government license or to U.S. law is prohibited.