Service Bulletin All SBs
| SB Number | Revision | SB Type | Title | Date (YYYY-MM-DD) |
|---|---|---|---|---|
| SB 500-27-004 | C | Alert | Aileron Joint Assembly Inspection and Replacement | 2014-07-01 |
Click on the button to download this Service Bulletin document.
SB Reason
Possible corrosion of the Aileron joint assembly bearing or shaft resulting in aileron friction being out of tolerance. Corrective action is to inspect aileron joint and replace with redesigned parts.
Revision C of this Service Bulletin updates the effectivity and company information.
SB Description
If friction is determined to be out of specification requirements (greater than 2 pounds), both left hand and right hand ailerons joints will be inspected for resistance. Installation of the following redesigned components on both left and right ailerons shall remove the requirement for inspection at 50 flight hours and every 100 flight hours subsequent: (1) Fitting Assy, Aileron Joint 27-105822-1004. (2) Assembly, Bellcrank, Left Hand 27-105820-1003. (3) Assembly, Bellcrank, Right Hand 27-109390-1003. (4) Bushing, Aileron Control 27-113922-2002.
SB Compliance
Eclipse Aviation Corporation considers this to be a required inspection that must be accomplished within 50 flight hours from the issue date of this service bulletin, and every 100 flight hours subsequent, until the redesigned parts are installed.
Effectivity
0001 - 0399
Export Control
These commodities, technology or software, were exported from the United States in accordance with the Export Administration Regulations. These commodities, technology or software are intended for use only in the End User’s country. An export license from the U.S. Department of Commerce may be required before these products can be re-exported, transferred, transshipped on a non-continuous voyage, or otherwise disposed of in any other country, either in their original form or after being incorporated into an end item. Diversion of this end-item or its use contrary to any applicable U.S. government license or to U.S. law is prohibited.