Service Bulletin All SBs
| SB Number | Revision | SB Type | Title | Date (YYYY-MM-DD) |
|---|---|---|---|---|
| SB 500-34-019 | C | Alert | Pitot/AOA Probe Inspection/test | 2008-08-20 |
Click on the button to download this Service Bulletin document.
SB Reason
This Service Bulletin executes and supplements Harco Labs, Inc, SB-34-10-10-001, Rev F - Pitot/AOA Probe 100435-X-().
SB Description
This Service Bulletin provides the aircraft effectivity and provides supplemental procedures for the accomplishment of Harco Labs, Inc, SB-34-10-10-001, Rev F - Pitot/AOA Probe 100435-X-().
SB Compliance
For aircraft with Standby Pitot/Static Probes P/N 100564-18: Eclipse Aviation Corporation considers this to be a mandatory inspection/test that must be accomplished and failed probes replaced within 50 hours or 90 days, which ever comes first from the issue date of this SB.
For aircraft with Standby Pitot/Static Probes P/N 100564-15 probes: Eclipse Aviation Corporation
considers this to be a mandatory inspection/test that must be accomplished within 10 hours or 30 days, which ever comes first from the issue date of this SB.
NOTE: Replacement of Standby Pitot/Static Probes P/N 100564-15 (accomplishment of SB 500-34-004 - Standby Pitot/Static Probe Upgrade) with Standby Pitot/Static Probes P/N 100564-18 will allow 50 hours or 90 days, which ever comes first from the issue date of this SB for Pitot/AOA Probe replacement.
For aircraft that complied with Harco Labs, Inc, SB-34-10-10-001, Rev B - Pitot/AOA Probe 100435-X-() (Includes Pitot AOA Probe Internal Tubing Heater Verification Test Procedure P1149, Rev C), confirm that the test results meet pass criteria found in Pitot AOA Probe Internal Tubing Heater Verification Test Procedure P1149, Rev E.
Effectivity
0001 - 0189
Export Control
These commodities, technology or software, were exported from the United States in accordance with the Export Administration Regulations. These commodities, technology or software are intended for use only in the End User’s country. An export license from the U.S. Department of Commerce may be required before these products can be re-exported, transferred, transshipped on a non-continuous voyage, or otherwise disposed of in any other country, either in their original form or after being incorporated into an end item. Diversion of this end-item or its use contrary to any applicable U.S. government license or to U.S. law is prohibited.